Protect your Raspberry PI SD card, use Read-Only filesystem



  • Hello,
    There is a (rather new) Olimex single board card with onboard 4GB eMMC MLC/SLC Flash
    Do you think this could be an answer to the corruption of data for an always on card ?
    (with regular backup...of cours...) or the problem is not related to SD card ???
    thx.



  • I tried this tutorial twice and both times couldn't SSH in after the final reboot. I found this tutorial a little more helpful - http://petr.io/en/blog/2015/11/09/read-only-raspberry-pi-with-jessie/. I susptec the difference was the part they mentione specifically enables SSH after changing these settings. That tutorial also makes it a little more clear that you have to add three lines in /etc/fstab, not just add ro twice.



  • Hi I successfully made my Pi Zero v 1.3 Read Mode, but a problem came up when I was trying to connect to internet with a 3g usb dongle.

    First, the modem get connected to internet, but after a minute or less, it losed the connection, and then it reconnects, and the same story was looping forever.

    After thinking, the problem was the DNS, because when the modem connects to internet, it changes the default DNS and tried to write the new DNS to the default file, here is the problem, the modem didn't notice that he cant write to the SD!

    I took the solution from here: https://github.com/emoncms/emoncms/blob/master/docs/RaspberryPi/read-only.md

    touch /tmp/resolv.conf
    sudo rm /etc/resolv.conf
    sudo ln -s /tmp/resolv.conf /etc/resolv.conf

    touch /tmp/resolv.conf.dhclient-new
    sudo chmod 777 /tmp/resolv.conf.dhclient-new
    sudo rm /etc/resolv.conf.dhclient-new
    sudo ln -s /tmp/resolv.conf.dhclient-new /etc/resolv.conf.dhclient-new

    sudo mv /sbin/dhclient-script /sbin/dhclient-script_original
    sudo ln -s /home/pi/emonpi/dhclient-script_raspbian_jessielite /sbin/dhclient-script

    Then rebooted and all worked fine, the 3g modem connected to the internet and never disconnected, then I successfully SSH with weaved.com service.

    After that another problem came up, my system is a GPS tracker for public transport, so there is a GPS module in my system, and the GPS was not working for the same reason as the 3g modem.

    I'm using a "Ublox Neo 6m GPS" and GPSD to get the required information.

    When GPSD run at boot it tryes to write a configuration file to open the stream, but it cant because the Pi is in read mode, so we need to put in that file what GPSD write at boot.

    To solve this, just edit this file: /etc/default/gpsd

    Then edit as this:

    START_DAEMON="true"
    GPSD_OPTIONS="-n"
    DEVICES="/dev/ttyAMA0" #My GPS is connected via UART, change if yours is via USB or whatelse
    USBAUTO="true"
    GPSD_SOCKET="/var/run/gpsd.sock"

    Finally reboot and all will work fine.

    So, if you are having a problem with a sensor or what else, first verify if the program who communicates with it needs to write sometime to the SD.

    Thank you and greetings from Mexico!!!



  • Hi !

    I've tried to complete tour tutorial but when I do the step "Move some system files to temp filesystem", I've detected that it result on a dbus problem that when the Raspberry is rebooted It can resolve the dhcp and hostname service.

    Can anyone help me please?



  • need to change UPEX4C_autoconfigfil in /usr/sbin/update-exim4.conf



  • Will brick your Pi if you're running the new PIXEL distro. Any idea what's causing this?



  • You should really add some commentary about the tmpfs lines in /etc/fstab before the code listing. When I got to that step, I read that we were ready to set the volume to read-only, and thought, "I know how to do that," and stopped reading at that point, resulting in an unbootable system. I'd imagine many other folks with sysadmin experience will do the same. Actually, you should probably add the tmpfs lines first before you start making changes that depend on them, then make the changes, then change fstab a second time to make it read-only. Also, for Jessie, the systemd changes are unnecessary, because /run is already a tmpfs volume. And it might be worth redirecting things from /var/run to /run just for simplicity (on Jessie).



  • How to fix this ?

    pi@raspberrypi(ro):~$ reboot
    Failed to execute operation: The name org.freedesktop.PolicyKit1 was not provided by any .service files
    Must be root.



  • you need to be root..
    use 'sudo'



  • Hello! Can anybody help me with user crontab file? I have problem: i installed raspbian in Read-only mode, i have some scripts, (cron jobs) that works every 5 minutes, 10 etc. I set it by crontab -e command, but after reboot, system is clean it, i think, because i moved /var/spool dir to tmpfs (like howto), and user cronjob file stored at /var/spool/cron/crontabs dir. How i can fix it for not clearing after system reboot? Thanks!



  • Did anyone figured out how to use crontab? it is wiped after reboot and i really need it :(


  • Staff

    We need to put the system into Read Write Mode before changing the crontab
    If you followed this tuto should be something like that

    sudo mount -o remount,rw /
    

    Then edit your crontab

    sudo crontab -e
    

    put pack in Read Only or reboot

    sudo mount -o remount,ro /
    


  • Charles you are going wrong. crontab -e give us file on /tmp which has been deleted on boot. We need to go this way:
    rw
    sudo su
    nano /etc/crontab (dont forget to add user) example below:

            • root /usr/bin/vpncheck.sh > /dev/null 2>&1


  • Hello Charles,
    I was wondering if I don't have entry about /tmp being a mount entry point for tmpfs neither in fstab nor mtab, what would be the point in moving things there? Am I missing something or?
    I am playing with Raspberry PI-2 and Raspbian Jessie.


Log in to reply
 

Looks like your connection to hallard.me's community was lost, please wait while we try to reconnect.